Omron CJ1W-MAD42 CJ1W-EIP21 Europe Automation and Safety

Omron CJ1W-MAD42 CJ1W-EIP21 Europe Automation and Safety

Omron CJ1W-MAD42 Europe Automation and Safety

Analog voltage and current mixed input and output unit – OMRON (SYSMAC CJ1 series – CJ1W-MAD) – 6I/O [4AI (4 x analog inputs (1-5Vdc / 0-5Vdc / 0-10Vdc / −10…+10Vdc / 4-20 mA; 1/4000 resolution; 1ms conversion time)) + 2AO (2 x analog outputs (1-5Vdc / 0-5Vdc / 0-10Vdc / −10…+10Vdc / 4-20 mA; 1/4000 resolution; 1ms conversion time))] – DIN rail mounting

OMRON CJ1W-MAD42 Manual And Instructions
CJ1W-MAD42 datasheetPDF datasheet
CJ1W-MAD42 PROGRAMMING MANUAL
CJ1W-MAD42 OPERATION MANUAL
CJ1W-MAD42 Instruction Installation Sheet

OMRON CJ1W-MAD42 Product information and technical parameters:
Brand: OMRON
Name: Analog I/O Unit
Model: CJ1W-MAD42
Unit type: CJ1 Special I/O Units.
Product name: Analog Output Unit.
I/O points: 4 inputs ; 2 outputs.
Signal range selection:
Set separately for each input and output.
Signal range, Resolution: 1 to 5 V,
0 to 5 V, 0 to 10 V, -10 to 10 V,
4 to 20 mA.
Resolution: 1/4,000 (Settable to 1/8,000).
Conversion period: 1 ms/point,
(Settable to 500 μs/point).
Accuracy at ambient temperature of 25°C:
Voltage: ±0.2% of F.S. Current: ±0.2% of F.S;
Voltage: ±0.3% of F.S. Current: ±0.3% of F.S.
External connection: Removable terminal block.
External power supply: 24 VDC +10% -15%, 140mA max.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.58A; 24V, –.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup.
Analog Input Units for converting analog input,
signals into binary data.
Analog Output Units for converting binary ,
data into analog output signals.Unit type: CJ1 CPU Bus Units.
Product Name: Position Control,
Unit with MECHATROLINK-II interface.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications.
Direct operation by ladder programming.
Control mode: Position control,
speed control or torque control;
No OMRON CJ1W-MAD42. of axes: 16 axes.
No. of unit numbers allocated: 1.
Current consumption : 5V, 0 Omron CJ1W-MAD4236A; 24V,–.
Standards: UC1, CE.
Decrease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management.
Control Servos for up to 16 axes in,
a motion network with one Position,
Control Unit that supports MECHATROLINK-II.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association OMRON CJ1W-MAD42. Product name: DC Power Supply Unit.
Power supply voltage: 24 VDC. 5A;
24-VDC output capacity, 0.8A;
Total power consumption, 25w.
Options: 24-VDC service power supply, No;
RUN output, No; Maintenance forecast monitor, No.
Standards: UC1, N, L, CE.
Equipped with the RUN output for,
checking the operation status,
as well as the replacement.
notification function for easy,
maintenance OMRON CJ1W-MAD42.
Lineup of five models including the,
AC power supply (25W).
Stable power supply is available from the,
CJ-series CPU Unit to each I/O Units via the,
dedicated bus. The most suitable Power Supply,
Unit can be selected among various I/O ,
specifications and/or options. Name: Loop-control CPU Unit.
I/O bits: 960 bits.
Program capacity: 20K steps.
DM words: 32K words.
EM words: 32K words × 1 bank E0_00000 to E0_32767.
Versatile Machine Control with the,
Highest Performance Standards in the Industry. Product name: AC Power Supply Unit.
Power supply voltage: 100 to 240VAC.
Output capacity: 5-VDC output capacity, 5A;
24-VDC output capacity, 0.8A;
Total power consumption, 25w.
Options: 24-VDC service power supply, No;
RUN output, No; Maintenance forecast monitor, Yes.
Standards: UC1, N, L, CE.
Equipped with the RUN output for,
checking the operation status,
as well as the replacement CJ1W-MAD42.
notification function for easy,
maintenance.
Lineup of five models including the,
AC power supply (25W).
Stable power supply is available from the,
CJ-series CPU Uniit to each I/O Units via the,
dedicated bus CJ1W-MAD42. The most suitable Power Supply,
Unit can be selected among various I/O ,
specifications and/or options.

Omron CJ1W-EIP21 Europe Automation and Safety

Omron Electronics CJ1 Series Programmable Logic Controller CPU Bus Unit, EtherNet I/P module, STP (shielded twisted-pair) cable of category 5, 5e, or higher, tag data link message service communications, 1 unit numbers word, 410 mA 5/DC

  • Manufacturer: Omron
  • Product Family: CJ Series
  • Communications Cable: STP
  • Communications Functions: Message Communications
  • Product Type: CPU Bus Unit
  • Units per CPU Unit: 8 max

Product Details

Communication Modules

CJ1 Digital I/O, Analogue I/O, and Communication modules clip together to the right of the CPU in any combination up to a maximum of 10 modules. A further 10 modules can be connected to a CJ1M-CPU13 or CJ1M-CPU23 based system as part of an expansion assembly.

Dimensions: Height 90mm, Width 31mm, Depth 89mm

CJ-series EtherNet/IP Unit
CJ1W-EIP21

Features

  • Large-capacity tag data links are easily enabled by simply setting connections, with no programming required.
  • Tag data links can be used to exchange data with up to 256 nodes over up to 256 connections.
  • Up to 256 connections can be set per Unit with up to 722 words of data per connection, for a total of up to 184,832 words of link data. (There is no limit to the data link capacity for the overall network.)
  • Data concurrency is maintained within each connection (for up to 722 words).
  • Tag data link settings can be changed for individual Units even while tag data links are being used on a network.
  • Errors can be diagnosed using the Network Configurator, and system errors can be monitored with a wide array of status flags.

OMRON CJ1W-EIP21Brand: OMRON.
Product Name: DC Input Unit.
OMRON Model: CJ1W-ID211.(CJ1W-ID231 CJ1W EIP21 Inputs: 32 pts)
Input voltage: 24 VDC.
OMRON ID211 Inputs: 16 pts.
Input CJ1W EIP21 current (typical): 7mA.
Input Module CJ1W-ID211 Connections: Removeable terminal CJ1W EIP21 block.

Brand: OMRON.
Product name: DC Input Unit.
Model: OMRON CJ1W-EIP21 CJ1W-ID212.
Points: 16 inputs(High-speed type)
Input voltage and current: 24 VDC, OMRON CJ1W-EIP21 7 mA.
Connection: Terminal block
Commons: 16 points, 1 common

Brand: OMRON CJ1W-EIP21 OMRON.
Product name: Profibus-DP master unit.
Model: CJ1W-PRM21.
Master unit provides data exchange, diagnostics and message communications.
Network type : Profibus-DP
CJ1W-PRM21 Rating : 12 Mbps: 1200 m distance: 125 nodes: shielded twisted pair cable: allows 7, 168 words of I/O data per PLL: one RS-485 port

Brand: OMRON.
Product name: Position Control Module.
Brand&Model: OMRON CJ1W-NC213.
Control method/Control output interface: Opeen-loop CJ1W-EIP21 control by pulse train
output/Open-collector output.
Position CJ1W-NC213 Module Number of control axes:: CJ1W-EIP21 2 axes.
No. of unit numbers allocated: 1.