EE-SPX613 OMRON Automation and Safety PLC

EE-SPX613 OMRON Automation and Safety PLC

สเปค EE-SPX613 OMRON Automation and Safety PLC


Product Description

Pipe-mounting Liquid Level Photomicrosensor with Built-in Amplifier
Liquid Level Photomicrosensor with operation mode and sensitivity selectors for easy application.

  • Operation mode selector allows modes to be switched easily.
  • Sensitivity selector is suitable for any 6- to 13-mm-diameter transparent or semi-transparent pipe with a wall thickness of 1 mm.
  • Uses a clean (with no powder parting agent) cable.
  • Operating voltage range: 12 to 24 VDC


EE-SPX613 OMRON Automation and Safety PLC

รายละเอียดสินค้า / Product Details

· The liquid level sensor is easy to use with its output operation switching and sensitivity switching functions.
· Mode setting can be adjusted freely with output operation switching function.
· Sensitivity switching function supports transparent and translucent pipes with ø6 mm to 13 mm and wall thickness 1 mm.
· Uses a clean code (no powder removal agent).
· Power supply voltage is 12 V to 24 V DC.

Omron Electronics, EE-SPX Series, Photomicrosensor with built-in amplifier, through-Beam pipe-mounting liquid level, NPN output, selectable output configuration of Dark-ON or Light-ON, pre-wired 1 m cable, 12-24 VDC, IEC 60529 IP50, polycarbonate case
  • Product Type: Photomicro Sensor
  • Manufacturer: Omron
  • Product Family: EE-SPX Series
  • Cable Length: 1 m
  • Output Configuration: Dark-ON or Light-ON (selectable)
  • Output Type: NPN output
  • Sensing Method: Through-beam type
  • Supply Voltage: 12 – 24 VDC
  • ModelsEE-SPX613Applicable pipeAny 6- to 13-mm-diameter pipe with a wall thickness of 1 mm that is made of FEP or any
    other material as transparent as FEP.Sensing objectLiquids in pipes (High-viscosity liquids or liquids with floating materials may not be detected.)Light sourceGaAs infrared LED with a peak wavelength of 940 nmIndicatorLight indicator GaP (Red LED: Peak wavelength of 700 nm)Supply voltage12 to 24 VDC ±10%, ripple (p-p): 5% max.Current consumptionAverage: 30 mA max., Peak: 80 mA max.Control outputNPN open collector:
    Load power supply voltage: 5 to 24 VDC
    Load current: 100 mA max.
    OFF current: 0.5 mA max.
    100 mA load current with a residual voltage of 0.8 V max.
    40 mA load current with a residual voltage of 0.4 V max.Ambient illumination3,000 lx max. with incandescent light or sunlight on the surface of the receiverAmbient temperature
    Operating: – 10 to +55 ° C
    Storage: – 25 to +65 ° C (with no icing or condensation)Ambient humidity
    Operating: 5% to 85%
    Storage: 5% to 95% (with no condensation)Vibration resistanceDestruction: 10 to 500 Hz, 1.0-mm single amplitude or 150 m/s2 in X, Y, and Z directions
    3 times and for 11 min eachShock resistanceDestruction: 500 m/s2 for 3 times each in X, Y, and Z directionsDegree of protectionIEC 60529 IP50Connecting methodPre-wired (Standard length: 1 m)Weight (packed state)Approx. 55 gMaterialCasePolycarbonateCoverAccessoriesSupport belt (2), slip protection tube (2), Instruction Manual

[ สนใจสินค้า ติดต่อเบอร์ : 086-341-8835 ]