Omron CJ1W-MD233 CJ1W-MD231 Automation and Safety

Omron CJ1W-MD233 CJ1W-MD231 Automation and Safety

Omron CJ1W-MD233 Automation and Safety

Omron CJ1WMD233 DC Input/Transistor Output Module, 16-Point, 24 VDC Input

Omron CJ DC input/transistor output module features a MIL connector connection with 16 input points having voltage rating of 24 VDC and 16 output points having voltage rating of 12 – 24 VDC

Omron Electronics CJ1 Series Programmable Logic Controller Basic I/O Unit, digital I/O module, 16-DC inputs (24/DC 7mA, 16 points/1 common)/16-NPN (transistor sinking) output (12-24/DC 0.5A, 16 points/1 common), MIL connector, 2 words allocation

  • Manufacturer: Omron
  • Product Family: CJ Series
  • Product Type: Basic I/O Unit

Features

Omron CJ DC input/transistor output module features a MIL connector connection with 16 input points having voltage rating of 24 VDC and 16 output points having voltage rating of 12 – 24 VDC

  • One mixed I/O unit has connectors for both inputs and outputs
  • Use mixed I/O units to easily build space saving systems
  • Mixed I/O units with 5 V TTL inputs are also available
  • A wide variety of connector terminal block conversion units are available to allow you to easily wire external I/O devices
  • Response time 0.1 ms ON and 0.8 ms OFF for output section, 8.0 ms ON and OFF for input section
  • Insulation resistance 20 M Ohm

Info & Guides

Data Sheet

Specifications

Brand NameOmronMFR Part NumberCJ1WMD233UPC36854880988UNSPSC32151705ItemDC Input/Transistor Output ModuleInput Type16-Point, 3.3 kOhm, 1-CircuitInput Rating24 VDC, 7 mAOutput Type16-Point, SinkingOutput Rating12 – 24 VDC, 0.1 mAElectrical ConnectionMIL ConnectorMounting TypeDIN RailStandard/ApprovalscULus Listed

Specifications

I/O systemCJ I/O Bus
Expansion unit typeBasic I/O Unit
Type of moduleDigital I/O
Number of digital inputs16
Digital input typePNP/NPN
Permitted voltage at input20.4-26.4 V
OFF/ON delay0-32 ms
Number of digital outputs16
Digital output typeNPN
Permitted voltage at output10.2-26.4 V
Output current0.5 A
Short-circuit protected outputs
I/O connection typeMIL (plug not included)
Number of I/O connectors2
Detachable I/O connector
Suitable for safety functions
Number of IOV (V+) terminals2
Number of IOG (V-) terminals2
Number of COM terminals2
Height90 mm
Width31 mm
Depth83.6 mm

Omron CJ1W-MD231 Automation and Safety

Description

Omron Mixed I/O Unit CJ1W-MD231

  • Extended Product Type: CJ1W
  • Product ID: CJ1W-MD231
  • OMRON Type Designation: CJ1W
  • Description: I/O MODULE 16 DIG 16 SOLID ST
  • Long Description: Input, Output (I/O) Module DIN Rail

Features

• Select the best interface for each application: Fujitsu connectors and MIL connectors.
• Select sinking outputs or sourcing outputs. The CJ1W-MD232 has load short-circuit protection.
• The ON and OFF response times can be set to between 0 and 32 ms in the Setup in the CPU Unit.
• Mixed I/O Units with 5-V TTL inputs are also available. *
• A wide variety of Connector-Terminal Block Conversion Units are available to allow you to easily wire external I/O devices.
* Applies to the CJ1W-MD563.

International Standards

• The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus,
UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.
• Contact your OMRON representative for further details and applicable conditions for these standards.

Specification

  • I/O points : 16 inputs
  • Input voltage and current :24 VDC, 7 mA
  • External connection: Fujitsu connector
  • Standards : UC1, N, CE
  • Output type : Sinking

OMRON CJ1W-MD231 Manual And Instructions
CJ1W-MD231 datasheetPDF datasheet
CJ1W-MD231 HardwareOPERATION MANUAL

OMRON CJ1W-MD231 Product information and technical parameters:
Brand: OMRON
Name: Mixed I/O Units
Model: CJ1W-MD231
Unit type: CJ1 Basic I/O Units.
Product name: DC Input/Transistor Output Units.
Specifications: Output type, Sinking;
I/O points, 16 inputs, 16 outputs;
Input voltage,Input current,
Maximum switching capacity, 24VDC, 7mA,
250 VAC/24 VDC, 0.5A;
Commons, 16 points, 1 common;
External connection, Fujitsu connector.
No. of words allocated: 2 words.
Current consumption: 5V, 0.13A; 24V, –.
Standards: UC1, N, CE.
A Wide Range of Basic Mixed,
I/O Units for Different Applications,
and Wiring Methods.
One Mixed I/O Unit has connectors for,
both inputs and outputs.
Use Mixed I/O Units to easily ,
build space-saving systems.A Wide Range of Basic Input,
Units for High Speed Input and,
Different Applications.
Receive ON/OFF signals from external,
devices into the PLC System to update,
I/O memory in the CPU Unit.
New high-speed input models CJ1W-ID212 and,
CJ1W-ID233 are now available. These units can,
help to increase system throughput OMRON CJ1W-MD231. Unit type: CJ1 Special I/O Units.
Product name: Analog Input Unit CJ1W-MD231
I/O points: 8 inputs;
Signal range selection: 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 to 10 V, 4 to 20mA;
1/4,000(Settable to 1/8,000)*2 .
Conversion period: 1 ms/point,
(250 μs/point can also be set.)*2.
Accuracy at ambient temperature of 25°C:
Voltage: ±0.2% of F. S. Current: ±0.4% of F.S OMRON CJ1W-MD231.
External connection: Removable terminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.42A; 24V, –.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup.
Analog Input Units for converting analog input,
signals into binary data.
Analog Output Units for converting binary ,
data into analog output signals. Product name: CJ2H CPU Units OMRON CJ1W-MD231.
Specifications: I/O capacity/Mountable Units(Expansion Racks),
2,560 points/40 Units(3 Expansion Racks max.) ;
Program capacity, 100K steps; Data memory capacity,
160K words(DM: 32K words, EM: 32K words × 4 bank);
LD nstructio execution time, 0.016 μs.
Current consumption(A): 5V,0.42(See note.); 24v, –.
Standards: UC1, N, L, CE.
CJ2H for high speed, high capacity.
The CJ2H Series is ideal for advanced machine.
automation needs such as those required in image.
processing inspection of electrical components and,
high speed sorting on conveyors. Unit type: CJ1 Basic I/O Units.
Product name: DC Input Units.
Specifications: I/O points, 32 inputs;
Input voltage and current: 24 VDC, 4.1 mA;
Commons, 16 points, 1 common; External connection,
Fujitsu connector; No. of words allocated, 2 word.
Currentt consumption: 5V, 0 CJ1W-MD231. 09A; 24V, –.
Standards: UC1, N, L, CE.
A Wide Range of Basic Input,
Units for High Speed Input and,
Different Applications.
Receive ON/OFF signals from external,
devices into the PLC System to update,
I/O memmory in the CPU Unit CJ1W-MD231.
New high-speed input models CJ1W-ID212 and,
CJ1W-ID233 are now available. These units can,
help to increase system throughput.